Ruamjai
Watch repair tools and workbench

Three Services, Each with a Clear Purpose

Whether your watch needs a battery and a quick check, a complete mechanical overhaul, or a careful restoration of something long-held, there is a service here for it.

Back to Home

How We Work

Each service at Ruamjai follows the same underlying process — careful assessment, honest communication, and work done to a standard we are comfortable standing behind.

1. Assessment

The watch is examined and its condition noted before anything else. You receive a clear account of what we find and a quote for the appropriate service.

2. Service

Work proceeds with the right tools and lubricants for the calibre. If anything unexpected appears, we contact you before continuing.

3. Verification

After service, timing is checked, water resistance tested where applicable, and the watch runs for a period before we consider it ready to return.

Quartz watch battery service
Service 01

Battery & Care

Attentive care for quartz watches, including a fresh battery, contact cleaning, seal review, and a light case clean. Where rated, water resistance is confirmed and gentle advice given on any gasket that should be renewed. A simple, useful service for everyday pieces; usually a few days.

  • Battery replacement with quality cell
  • Contact and terminal cleaning
  • Seal inspection and renewal where needed
  • Light case and crystal clean
  • Water resistance test (rated models)

Process

1Watch received and condition recorded
2Case opened, contacts cleaned, battery fitted
3Seals inspected and replaced if needed
4Water resistance tested, case cleaned
5Ready for collection — typically 3–5 days
฿4,500 Enquire
Service 02

Full Service

A complete service for mechanical watches losing steady timekeeping. We clean and re-oil the movement, inspect the balance and mainspring, replace worn parts where needed, and regulate the timing across positions. Seals are renewed and the crown checked. Suited to daily watches; about three weeks.

  • Complete movement disassembly and ultrasonic clean
  • Inspection of balance, mainspring, and escapement
  • Re-oiling with grade-appropriate lubricants
  • Timing regulation across six positions
  • Seal, crown, and case tube renewal

Process

1Assessment and condition documentation
2Movement removed, disassembled, ultrasonically cleaned
3Components inspected; worn parts identified and replaced
4Movement re-assembled with fresh lubricants
5Timing machine regulation, water resistance test, run-in period
฿9,800 Enquire
Mechanical watch movement service
Heirloom watch restoration
Service 03

Heirloom Restoration

A careful restoration for family heirlooms and treasured older watches. We overhaul the movement, conserve the case and dial in keeping with their age, and make every decision together with you. Original parts are retained wherever possible, and the work is documented. Six to eight weeks.

  • Full movement overhaul with parts sourcing
  • Case and dial conservation — no unnecessary refinishing
  • Original parts retained wherever function allows
  • Owner consulted at each significant decision point
  • Written restoration record provided at collection

Process

1Initial consultation — watch history, owner's wishes, condition
2Detailed assessment and written condition report
3Parts sourcing discussed and approved by owner
4Movement overhaul and case/dial conservation
5Final testing, documentation, handover with records
฿14,300 Enquire

Which Service Is Right for You?

Use this comparison to find the service that fits your watch's situation. If still unsure, a short message is enough — we can advise after hearing a little about the piece.

What does your watch need? Battery & Care Full Service Heirloom Restoration
Quartz watch stopped or erratic✓ Best fit
Mechanical watch gaining/losing time✓ Best fit
Older or vintage movement overhaul✓ Best fit
Family or sentimental piece✓ Best fit
Water resistance test included
Written service record provided
Collaborative decision-making
Starting price฿4,500฿9,800฿14,300

Standards Applied Across All Services

Regardless of the service type, these practices are consistent.

Written Quote First

We confirm the cost in writing before work begins. No invoice surprises on collection.

Secure Watch Custody

Watches are stored securely when not on the bench. Each piece is logged in and out of active work.

Correct Lubricants

We use calibre-appropriate lubricants. Using the wrong grade shortens a movement's service life; we take this seriously.

Timing Verification

Mechanical movements are tested on a timing machine after service — not estimated by ear or feel.

No Unnecessary Work

We do not add services that are not needed. A watch that is running well and only needs a battery gets a battery and a check — not an upsell.

Progress Communication

For longer jobs, we provide updates. If you have not heard from us and want to know where things stand, a message is always welcome.

Service Pricing

Prices shown are starting points and confirmed in writing after assessment. Currency: Thai Baht (฿).

Battery & Care

฿4,500

per service / quartz watches

  • Battery replacement
  • Contact cleaning
  • Seal inspection and renewal
  • Water resistance test
  • Light case clean
Enquire

Heirloom Restoration

฿14,300

per piece / older and vintage watches

  • Movement overhaul
  • Case and dial conservation
  • Original parts retained
  • Owner-led decisions
  • Full written documentation
Enquire

Not Sure Which Service Fits?

A short description of your watch and what it is doing — or not doing — is usually enough for us to point you in the right direction. No commitment required.

Send an Enquiry